{"title":"BMW Fuel Injectors","description":"\u003cp\u003eFuel Injector Clinic injector sets for BMW applications, including boosted, swapped, and performance street or track builds.\u003c\/p\u003e","products":[{"product_id":"is803-2150h","title":"2150cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT DEN4 or add Plug \u0026amp; Play adaptors PADPDtoJ4. DO NOT USE WITH VP-Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035237505,"sku":"IS803-2150H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-64-14-14x4_5fba1faa-9952-4f6d-a33f-d5b05ac8bd78.jpg?v=1779498420"},{"product_id":"is803-1650h","title":"1650cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035368577,"sku":"IS803-1650H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-64-14-14x4_4d42e082-f9db-47df-b23e-dcdfe86630d2.jpg?v=1779498422"},{"product_id":"is803-1440h","title":"1440cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035401345,"sku":"IS803-1440H","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-64-14-14x4_8f3c2da1-fb91-4194-9815-188e5f924a6d.jpg?v=1779498424"},{"product_id":"is803-1200h","title":"1200cc (Previously 1100cc) FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. PREVIOUSLY IS803-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035434113,"sku":"IS803-1200H","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-64-14-14x4_53d0adac-61f2-43cd-86e7-4c7c270a41c7.jpg?v=1779498427"},{"product_id":"is803-1000h","title":"1000cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoJ4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035565185,"sku":"IS803-1000H","price":457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x4_413c06d3-2db9-4ff4-967e-1de50832fa26.jpg?v=1779498429"},{"product_id":"is803-0775h","title":"775cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoJ4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035696257,"sku":"IS803-0775H","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x4_1be7f558-2ecf-4ee7-80bf-d2b3f5a9d142.jpg?v=1779498431"},{"product_id":"is803-0650h","title":"650cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoJ4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757035892865,"sku":"IS803-0650H","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x4_0536c95f-ce83-45a9-a49f-8c005f0ec330.jpg?v=1779498433"},{"product_id":"is803-0525h","title":"525cc FIC BMW E30 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E30 M3 Fuel Injector Clinic Injector Set: 4x525cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoJ4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036089473,"sku":"IS803-0525H","price":352.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x4_95746b85-2bc7-4c65-97e8-54ef82e51110.jpg?v=1779498436"},{"product_id":"is802-2150h","title":"2150cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT DEN6 or add Plug \u0026amp; Play adaptors PADPDtoJ6. DO NOT USE WITH VP-Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036220545,"sku":"IS802-2150H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-64-14-14x6_683bbc43-d611-4dd7-83e9-47f5f9fd96a4.jpg?v=1779498439"},{"product_id":"is802-1650h","title":"1650cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036417153,"sku":"IS802-1650H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-64-14-14x6_2ac034b2-80f5-4bd5-ad32-74162a5158cc.jpg?v=1779498441"},{"product_id":"is802-1440h","title":"1440cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036548225,"sku":"IS802-1440H","price":1218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-64-14-14x6_b2ead77e-9d24-40df-bba2-843582733146.jpg?v=1779498444"},{"product_id":"is802-1200h","title":"1200cc (Previously 1100cc) FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. PREVIOUSLY IS802-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036712065,"sku":"IS802-1200H","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-64-14-14x6_ba9cecfe-3278-4c1f-9860-68a686540118.jpg?v=1779498446"},{"product_id":"is802-1000h","title":"1000cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757036875905,"sku":"IS802-1000H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x6_40c10b27-6047-4af8-a399-569270e1bc6f.jpg?v=1779498449"},{"product_id":"is802-0775h","title":"775cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037006977,"sku":"IS802-0775H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x6_7968e06a-730c-4a6c-a131-836c387a05f5.jpg?v=1779498451"},{"product_id":"is802-0650h","title":"650cc FIC BMW E36 M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E36 M3 Fuel Injector Clinic Injector Set: 6x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6 \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037105281,"sku":"IS802-0650H","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x6_f1fb377c-7e6d-4dd4-8073-4ca01bd5bd62.jpg?v=1779498454"},{"product_id":"is801-2150h","title":"2150cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x2150cc Saturated \/ High Impedance Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Great injector for E85 or other high volume fuels! Includes pigtails PGT Den6 or add Plug \u0026amp; Play adaptors PADPDtoJ8. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037138049,"sku":"IS801-2150H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-14-14x6_5a3285f1-c7b5-4405-a4c7-be3905d57a06.jpg?v=1779498456"},{"product_id":"is801-1650h","title":"1650cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037170817,"sku":"IS801-1650H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-14-14x6_f53718dc-2191-41c4-9e67-caab2b96dc74.jpg?v=1779498459"},{"product_id":"is801-1440h","title":"1440cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037203585,"sku":"IS801-1440H","price":1218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-14-14x6_646849e6-381f-4302-85bb-8f93e8b21c02.jpg?v=1779498461"},{"product_id":"is801-1200h","title":"1200cc (Previously 1100cc) FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. PREVIOUSLY IS801-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037301889,"sku":"IS801-1200H","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-14-14x6_1235e680-887c-4325-898b-e2580bb6d2d8.jpg?v=1779498462"},{"product_id":"is801-1000h","title":"1000cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037465729,"sku":"IS801-1000H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x6_9468c84e-bc4c-43b8-baff-ff2658b0cc94.jpg?v=1779498464"},{"product_id":"is801-0775h","title":"775cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037531265,"sku":"IS801-0775H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x6_068c3b84-58ea-4cf5-b8eb-24709ff25f20.jpg?v=1779498465"},{"product_id":"is801-0650h","title":"650cc FIC BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E46 M3 and Z4 M Fuel Injector Clinic Injector Set: 6x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037629569,"sku":"IS801-0650H","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x6_b613a05a-b951-426f-9489-ef8ae4eb01c7.jpg?v=1779498467"},{"product_id":"is804-2150h","title":"2150cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT DEN8 or add Plug \u0026amp; Play adaptors PADPDtoJ8. DO NOT USE WITH VP-Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037727873,"sku":"IS804-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-14-14x8_30521346-b11b-4612-9dc7-6af47e27d93d.jpg?v=1779498468"},{"product_id":"is804-1650h","title":"1650cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757037891713,"sku":"IS804-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-14-14x8_ad8be8c6-6012-4015-b359-82b79c1e5b79.jpg?v=1779498470"},{"product_id":"is804-1440h","title":"1440cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038055553,"sku":"IS804-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-14-14x8_87bdaf22-92f1-4ae0-94bd-4892baf372ae.jpg?v=1779498472"},{"product_id":"is804-1200h","title":"1200cc (Previously 1100cc) FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. PREVIOUSLY IS804-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038186625,"sku":"IS804-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-14-14x8_ae464b10-d05b-47d6-84b6-4333fe712712.jpg?v=1779498474"},{"product_id":"is804-1000h","title":"1000cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038317697,"sku":"IS804-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_26b82254-00e7-40a4-9fe5-8c8474f34657.jpg?v=1779498476"},{"product_id":"is804-0775h","title":"775cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038579841,"sku":"IS804-0775H","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_9b6f63e2-a855-463c-be16-a6946c892ca4.jpg?v=1779498479"},{"product_id":"is804-0650h","title":"650cc FIC BMW E9X M3 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E9X M3 Fuel Injector Clinic Injector Set: 8x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug \u0026amp; Play adaptors PADPUtoJ6 \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038612609,"sku":"IS804-0650H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_f13e9462-de29-4513-834e-9fc9ab3c97ed.jpg?v=1779498481"},{"product_id":"is810-2150h","title":"2150cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT DEN10 or add Plug \u0026amp; Play adaptors PADPDtoJ10. DO NOT USE WITH VP-Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038645377,"sku":"IS810-2150H","price":2032.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-14-14x10_e315513d-25bb-4ae5-8cd2-e77540bcaf9b.jpg?v=1779498482"},{"product_id":"is810-1650h","title":"1650cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038678145,"sku":"IS810-1650H","price":2032.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-14-14x10_aa7c131d-2585-43f9-a79b-8da64d4144a0.jpg?v=1779498484"},{"product_id":"is810-1440h","title":"1440cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC10 or add Plug \u0026amp; Play adaptors PADPUtoJ10. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038710913,"sku":"IS810-1440H","price":1838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-14-14x10_161af466-af94-45e7-826a-c70e05ad445c.jpg?v=1779498485"},{"product_id":"is810-1200h","title":"1200cc (Previously 1100cc) FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038743681,"sku":"IS810-1200H","price":1350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-14-14x10_688ef4ee-1fcc-4def-9a24-d5637a37ece2.jpg?v=1779498486"},{"product_id":"is810-1000h","title":"1000cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC10 or add Plug \u0026amp; Play adaptors PADPUtoJ10. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038776449,"sku":"IS810-1000H","price":951.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x10_e154a276-dcef-4e5a-b943-ab588af25993.jpg?v=1779498488"},{"product_id":"is810-0775h","title":"775cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC10 or add Plug \u0026amp; Play adaptors PADPUtoJ10. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038809217,"sku":"IS810-0775H","price":909.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x10_bf35db4a-c141-48df-b02f-a272e840e3ef.jpg?v=1779498489"},{"product_id":"is810-0650h","title":"650cc FIC BMW E60 V10 Fuel Injector Clinic Injector Set (High-Z)","description":"BMW E60 V10 Fuel Injector Clinic Injector Set: 10x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC10 or add Plug \u0026amp; Play adaptors PADPUtoJ10 \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038874753,"sku":"IS810-0650H","price":856.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x10_873fd6e3-1e83-42e7-897b-808863e1e21f.jpg?v=1779498490"},{"product_id":"is831-2150h","title":"2150cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x2150cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTDEN6 or add PADPDtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757038907521,"sku":"IS831-2150H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-38-14-15x6_599f6091-89cb-49a6-9ef2-8a98dfc822ca.jpg?v=1779498492"},{"product_id":"is831-1650h","title":"1650cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1650cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTJETQ6 or add PADPJtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039005825,"sku":"IS831-1650H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-38-14-14x6_3eabd5a1-870f-42e7-847c-16fbcba6416f.jpg?v=1779498493"},{"product_id":"is831-1440h","title":"1440cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1440cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039104129,"sku":"IS831-1440H","price":1218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-38-14-14x6_e1d40157-419d-448e-9819-676fb5654f37.jpg?v=1779498494"},{"product_id":"is831-1200h-d","title":"1200cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1200cc-SP High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039235201,"sku":"IS831-1200H-D","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_a8437070-c979-4eca-8575-f16bd9fed554.jpg?v=1779498495"},{"product_id":"is831-1200h","title":"1200cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1200cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTJETQ6 or add PADPJtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039300737,"sku":"IS831-1200H","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-38-14-14x6_ed4feb1e-1491-46f9-b2c8-0512a773af13.jpg?v=1779498497"},{"product_id":"is831-1000h","title":"1000cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1000cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039431809,"sku":"IS831-1000H","price":741.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_15d5e496-5785-4c0f-83c2-4b8480d60324.jpg?v=1779498498"},{"product_id":"is831-0850h","title":"0850cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x0850cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039530113,"sku":"IS831-0850H","price":620.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_02807617-810d-4031-9289-ba3646395160.jpg?v=1779498500"},{"product_id":"is831-0660h-sp","title":"0660cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x0660cc-SP High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039628417,"sku":"IS831-0660H-SP","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_7bbf99ec-0051-449e-9bb2-54015338ae94.jpg?v=1779498501"},{"product_id":"is831-0540h","title":"0540cc FIC BMW x40i  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW x40i Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x0540cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039759489,"sku":"IS831-0540H","price":546.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_2e38e7f2-4a9e-42cc-b539-0f6056a14f8c.jpg?v=1779498502"},{"product_id":"is833-2150h","title":"2150cc FIC BMW M2-4 series S58 (G80\/G82\/G87)  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW M2-4 series S58 (G80\/G82\/G87) Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x2150cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTDEN6 or add PADPDtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039857793,"sku":"IS833-2150H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-38-14-15x6_861b24e9-2d1a-482c-a2d0-aa162881897e.jpg?v=1779498504"},{"product_id":"is833-1650h","title":"1650cc FIC BMW M2-4 series S58 (G80\/G82\/G87)  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW M2-4 series S58 (G80\/G82\/G87) Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1650cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTJETQ6 or add PADPJtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757039956097,"sku":"IS833-1650H","price":1355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-38-14-14x6_b0a0127e-f3f7-4bda-8712-9bbbd097f7c7.jpg?v=1779498505"},{"product_id":"is833-1440h","title":"1440cc FIC BMW M2-4 series S58 (G80\/G82\/G87)  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW M2-4 series S58 (G80\/G82\/G87) Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1440cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757040087169,"sku":"IS833-1440H","price":1218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-38-14-14x6_a9b496c9-1e1d-43c1-9a7b-489cd3c5e7e1.jpg?v=1779498507"},{"product_id":"is833-1200h-d","title":"1200cc FIC BMW M2-4 series S58 (G80\/G82\/G87)  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW M2-4 series S58 (G80\/G82\/G87) Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1200cc-SP High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug \u0026amp; Play fit to OEM harness. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757040218241,"sku":"IS833-1200H-D","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-14x6_e2afc461-f000-45d3-ad67-f352c64dad23.jpg?v=1779498508"},{"product_id":"is833-1200h","title":"1200cc FIC BMW M2-4 series S58 (G80\/G82\/G87)  Fuel Injector Clinic Injector Set (High-Z)","description":"BMW M2-4 series S58 (G80\/G82\/G87) Fuel Injector Clinic Injector Set to fit aftermarket intake manifold or port injection kit: 6x1200cc High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTJETQ6 or add PADPJtoU6. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757040283777,"sku":"IS833-1200H","price":846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-38-14-14x6_fdab6964-3ba7-4865-9638-d10fab01ad52.jpg?v=1779498509"}],"url":"https:\/\/baeracingperformance.com\/collections\/bmw-fuel-injectors.oembed","provider":"Bae Racing Performance","version":"1.0","type":"link"}