{"title":"GM \/ Chevrolet Fuel Injectors","description":"\u003cp\u003eFuel Injector Clinic injector sets for GM and Chevrolet applications, including LS, small block, truck, and performance swap platforms.\u003c\/p\u003e","products":[{"product_id":"is300-2150h","title":"2150cc (240 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x2150cc\/min (200lbs\/hr) at 3 bar (43.5psi) fuel pressure and 240lbs\/hr (2500cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGT DEN8 or add Plug \u0026amp; Play adaptors PADPDtoJ8. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. Great injector for E85 applications! DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757051523201,"sku":"IS300-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-64-14-14x8_GMDATA_5c87455b-0003-4cce-a809-ceb1c0d60caf.jpg?v=1779508245"},{"product_id":"is300-1650h","title":"1650cc (180 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x1650cc\/min (160lbs\/hr) at 3 bar (43.5psi) fuel pressure and 180lbs\/hr (1900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757051654273,"sku":"IS300-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-64-14-14x8_GMDATA_a389e05d-688e-4875-ba34-1ea050826dbe.jpg?v=1779508246"},{"product_id":"is300-1440h","title":"1440cc (160 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x1440cc\/min (140lbs\/hr) at 3 bar (43.5psi) fuel pressure and 160lbs\/hr (1700cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757051785345,"sku":"IS300-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-64-14-14x8_GMDATA_30e5ce90-113e-427b-bd2c-7605bbb08b03.jpg?v=1779508247"},{"product_id":"is300-1200h","title":"1200cc (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. PREVIOUSLY IS300-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757051916417,"sku":"IS300-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-64-14-14x8_GMDATA_9a6c0a47-5c70-42c1-9580-f61635161966.jpg?v=1779508248"},{"product_id":"is300-1000h","title":"1000cc (100 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x1000cc\/min (85lbs\/hr) at 3 bar (43.5psi) fuel pressure and 100lbs\/hr (1040cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052047489,"sku":"IS300-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_d8351436-e1a7-4f6c-bd61-d623b43e1e41.jpg?v=1779508249"},{"product_id":"is300-0775h","title":"775cc (85 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x775cc\/min (74lbs\/hr) at 3 bar (43.5psi) fuel pressure and 85lbs\/hr (900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052145793,"sku":"IS300-0775H","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_83943d4c-2823-4b7d-be89-b567cdd78b41.jpg?v=1779508250"},{"product_id":"is300-0650h","title":"650cc (72 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x650cc\/min (62lbs\/hr) at 3 bar (43.5psi) fuel pressure and 72lbs\/hr (750cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052276865,"sku":"IS300-0650H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_dc9a6ec8-f2a5-4845-8d9a-c9554a40af1e.jpg?v=1779508251"},{"product_id":"is300-0525h","title":"525cc (58 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x525cc\/min (50lbs\/hr) at 3 bar (43.5psi) fuel pressure and 58lbs\/hr (600cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052407937,"sku":"IS300-0525H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_e25da94e-9ac5-4a75-b5d1-d03b0057e4af.jpg?v=1779508252"},{"product_id":"is300-0445h","title":"445cc (50 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x445cc\/min (42lbs\/hr) at 3 bar (43.5psi) fuel pressure and 50lbs\/hr (520cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8.These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052539009,"sku":"IS300-0445H","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_dfb50519-9b0b-4d60-81ba-d864f4de772c.jpg?v=1779508253"},{"product_id":"is300-0365h","title":"365cc (40 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for SBC engines (High-Z)","description":"Small Block Chevy Gen II Fuel Injector Clinic Injector Set: 8x365cc\/min (35lbs\/hr) at 3 bar (43.5psi) fuel pressure and 40lbs\/hr (420cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052637313,"sku":"IS300-0365H","price":609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_6fb5064d-6bd6-4680-a3bb-14de8851cf04.jpg?v=1779508254"},{"product_id":"is301-2150h","title":"2150cc (240 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x2150cc\/min (200lbs\/hr) at 3 bar (43.5psi) fuel pressure and 240lbs\/hr (2500cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGT DEN8 or add Plug \u0026amp; Play adaptors PADPDtoU8. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052768385,"sku":"IS301-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-64-14-14x8_GMDATA_a236fcbb-5a62-4c99-b846-c9b44bf03476.jpg?v=1779508255"},{"product_id":"is301-1650h","title":"1650cc (180 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x1650cc\/min (160lbs\/hr) at 3 bar (43.5psi) fuel pressure and 180lbs\/hr (1900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052899457,"sku":"IS301-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-64-14-14x8_GMDATA_JET_40d402ed-77b6-4164-b869-82b56cd217b9.jpg?v=1779508255"},{"product_id":"is301-1440h","title":"1440cc (160 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x1440cc\/min (140lbs\/hr) at 3 bar (43.5psi) fuel pressure and 160lbs\/hr (1700cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052964993,"sku":"IS301-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-64-14-14x8_GMDATA_e9544620-51d3-4ad5-a489-7c3ba9fd04d0.jpg?v=1779508257"},{"product_id":"is301-1200h","title":"1200cc (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. PREVIOUSLY IS301-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757052997761,"sku":"IS301-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-64-14-14x8_GMDATA_dbdd9a2a-61ce-49a2-910f-3a33f5f85c99.jpg?v=1779508257"},{"product_id":"is301-1000h","title":"1000cc (100 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x1000cc\/min (95lbs\/hr) at 3 bar (43.5psi) fuel pressure and 110lbs\/hr (1155cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053030529,"sku":"IS301-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_0602152a-137b-455a-af4a-ededd0db28bf.jpg?v=1779508258"},{"product_id":"is301-0775h","title":"775cc (85 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x775cc\/min (74lbs\/hr) at 3 bar (43.5psi) fuel pressure and 85lbs\/hr (900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053063297,"sku":"IS301-0775H","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_0a496aea-46f6-4375-bc5b-fd681de2cad2.jpg?v=1779508259"},{"product_id":"is301-0650h","title":"650cc (72 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x650cc\/min (62lbs\/hr) at 3 bar (43.5psi) fuel pressure and 72lbs\/hr (750cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053096065,"sku":"IS301-0650H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_7381a164-6af9-44a0-adcd-e0624dc3a746.jpg?v=1779508260"},{"product_id":"is301-0525h","title":"525cc (58 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x525cc\/min (50lbs\/hr) at 3 bar (43.5psi) fuel pressure and 58lbs\/hr (600cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053128833,"sku":"IS301-0525H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_498a3b10-cc2e-400f-abf9-c42c73cb6f6c.jpg?v=1779508261"},{"product_id":"is301-0445h","title":"445cc (50 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x445cc\/min (42lbs\/hr) at 3 bar (43.5psi) fuel pressure and 50lbs\/hr (520cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053194369,"sku":"IS301-0445H","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_228f3cbe-23f8-49ed-9a50-4600f46b4941.jpg?v=1779508262"},{"product_id":"is301-0365h","title":"365cc (40 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)","description":"LS1 Fuel Injector Clinic Injector Set: 8x365cc\/min (35lbs\/hr) at 3 bar (43.5psi) fuel pressure and 40lbs\/hr (420cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoJ8 These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053292673,"sku":"IS301-0365H","price":609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-64-14-14x8_GMDATA_abcbf181-b3ca-4674-a72e-db82183fd257.jpg?v=1779508264"},{"product_id":"is302-2150h","title":"2150cc (240 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x2150cc\/min (200lbs\/hr) at 3 bar (43.5psi) fuel pressure and 240lbs\/hr (2500cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGT DEN8 or add Plug \u0026amp; Play adaptors PADPDtoU8. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053423745,"sku":"IS302-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-14-15x8_GMDATA_ac819bef-9bca-47c3-a2b0-0fd3ef01f388.jpg?v=1779508265"},{"product_id":"is302-1650h","title":"1650cc (180 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x1650cc\/min (160lbs\/hr) at 3 bar (43.5psi) fuel pressure and 180lbs\/hr (1900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053685889,"sku":"IS302-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-14-15x8_GMDATA_35cdf70a-4960-4f00-a867-ed280ea00684.jpg?v=1779508266"},{"product_id":"is302-1440h","title":"1440cc (160 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x1440cc\/min (140lbs\/hr) at 3 bar (43.5psi) fuel pressure and 160lbs\/hr (1700cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053718657,"sku":"IS302-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-14-15x8_GMDATA_bc273759-e4ad-4d46-8c73-9691ea21af50.jpg?v=1779508268"},{"product_id":"is302-1200h-d","title":"1200cc-D (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x1200cc-D\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053751425,"sku":"IS302-1200H-D","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200D-53-14-15x8_GMDATA_a071d59a-1567-4bb7-872b-9b2a0ea291c9.jpg?v=1779508271"},{"product_id":"is302-1200h","title":"1200cc (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTJETR8 or add Plug \u0026amp; Play adaptors PADPJtoU8. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. PREVIOUSLY IS302-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053784193,"sku":"IS302-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-14-15x8_GMDATA_9109d0a5-f62a-48ca-91a4-00ba279a9f47.jpg?v=1779508272"},{"product_id":"is302-1000h","title":"1000cc (100 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x1000cc\/min (85lbs\/hr) at 3 bar (43.5psi) fuel pressure and 100lbs\/hr (1040cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053849729,"sku":"IS302-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_83e5623e-1008-4d6a-aba2-058f228b025d.jpg?v=1779508273"},{"product_id":"is302-0775h","title":"775cc (85 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x775cc\/min (74lbs\/hr) at 3 bar (43.5psi) fuel pressure and 85lbs\/hr (900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757053980801,"sku":"IS302-0775H","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_c4efdde9-95e7-410e-8754-c5b8518741b4.jpg?v=1779508273"},{"product_id":"is302-0650h","title":"650cc (72 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x650cc\/min (62lbs\/hr) at 3 bar (43.5psi) fuel pressure and 72lbs\/hr (750cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054079105,"sku":"IS302-0650H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_cbcda75d-335b-4d42-88a8-18158f2b67f3.jpg?v=1779508274"},{"product_id":"is302-0525h","title":"525cc (58 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x525cc\/min (50lbs\/hr) at 3 bar (43.5psi) fuel pressure and 58lbs\/hr (600cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054210177,"sku":"IS302-0525H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_ae0d3cda-5dee-4112-a788-b7830167f0a2.jpg?v=1779508276"},{"product_id":"is302-0445h","title":"445cc (50 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x445cc\/min (42lbs\/hr) at 3 bar (43.5psi) fuel pressure and 50lbs\/hr (520cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054341249,"sku":"IS302-0445H","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_49931220-de3c-42c6-aaca-c6ae22f77d61.jpg?v=1779508276"},{"product_id":"is302-0365h","title":"365cc (40 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS2 engines (High-Z)","description":"LS2 Fuel Injector Clinic Injector Set: 8x365cc\/min (35lbs\/hr) at 3 bar (43.5psi) fuel pressure and 40lbs\/hr (420cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054472321,"sku":"IS302-0365H","price":609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-15x8_GMDATA_2a443571-5ea2-4136-a011-e3d7c8d24d5a.jpg?v=1779508277"},{"product_id":"is303-2150h","title":"2150cc (240 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x2150cc\/min (200lbs\/hr) at 3 bar (43.5psi) fuel pressure and 240lbs\/hr (2500cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGT DEN8 or add Plug \u0026amp; Play adaptors PADPDtoU8. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054603393,"sku":"IS303-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-38-14-15x8_GMDATA_c866cbe0-536d-4d3e-86a8-bb3672b50f2e.jpg?v=1779508278"},{"product_id":"is303-1650h","title":"1650cc (180 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS3, LS7, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x1650cc\/min (160lbs\/hr) at 3 bar (43.5psi) fuel pressure and 180lbs\/hr (1900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054734465,"sku":"IS303-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-38-14-15x8_GMDATA_928352d5-0db0-4064-8c5f-57a961a0608a.jpg?v=1779508279"},{"product_id":"is303-1440h","title":"1440cc (160 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS3, LS7, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x1440cc\/min (140lbs\/hr) at 3 bar (43.5psi) fuel pressure and 160lbs\/hr (1700cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054865537,"sku":"IS303-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-38-14-15x8_GMDATA_a34db041-4bb9-4245-8e0e-48ec7e77f071.jpg?v=1779508280"},{"product_id":"is303-1200h-d","title":"1200cc-D (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x1200cc-D\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757054963841,"sku":"IS303-1200H-D","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200D-38-14-15x8_GMDATA_3b69d07a-23ff-4a9a-8a34-30a81f08e093.jpg?v=1779508281"},{"product_id":"is303-1200h","title":"1200cc (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes pigtails PGTJETR8 or add Plug \u0026amp; Play adaptors PADPJtoU8. Plug and Play GM ECU Data available on our website. PREVIOUSLY IS303-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055094913,"sku":"IS303-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-38-14-15x8_GMDATA_43feee04-6068-485b-9986-e92bdd262d66.jpg?v=1779508282"},{"product_id":"is303-1000h","title":"1000cc (100 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for LS3, LS7, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x1000cc\/min (85lbs\/hr) at 3 bar (43.5psi) fuel pressure and 100lbs\/hr (1040cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055225985,"sku":"IS303-1000H","price":924.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-15x8_GMDATA_3aa7f1b0-5d67-4557-bb4c-be0243e63c12.jpg?v=1779508283"},{"product_id":"is303-0850h","title":"850cc (94 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z) Previously 770cc","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x850cc\/min (81lbs\/hr) at 3 bar (43.5psi) fuel pressure and 94lbs\/hr (980cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055357057,"sku":"IS303-0850H","price":735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-15x8_GMDATA_19055eef-1c5e-432e-ab27-7363b9ace98d.jpg?v=1779508284"},{"product_id":"is303-0660h-sp","title":"0660cc (72 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x0660cc\/min (62lbs\/hr) at 3 bar (43.5psi) fuel pressure and 72lbs\/hr (765cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055455361,"sku":"IS303-0660H-SP","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-15x8_GMDATA_19620943-0a87-4240-b032-48b8ddb277c2.jpg?v=1779508285"},{"product_id":"is303-0540h","title":"540cc (60 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for LS3, LS7, LSA, L76, L92, and L99 engines (High-Z)","description":"LS3, LS7, LSA, L76, L92, L99 Fuel Injector Clinic Injector Set: 8x540cc\/min (52lbs\/hr) at 3 bar (43.5psi) fuel pressure and 60lbs\/hr (625cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Drop in plug fitment! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055586433,"sku":"IS303-0540H","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-14-15x8_GMDATA_a1c93b0c-15ba-4e48-b984-a70b5b1b50ec.jpg?v=1779508286"},{"product_id":"is304-2150h","title":"2150cc (240 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x2150cc\/min (200lbs\/hr) at 3 bar (43.5psi) fuel pressure and 240lbs\/hr (2500cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTDEN8 or add PADPDtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. DO NOT USE WITH VP-Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055684737,"sku":"IS304-2150H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-14-14x8_GMDATA_b7b07b20-c13c-4b48-870a-f9a18395f164.jpg?v=1779508286"},{"product_id":"is304-1650h","title":"1650cc (180 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x1650cc\/min (160lbs\/hr) at 3 bar (43.5psi) fuel pressure and 180lbs\/hr (1900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. This injector set features easy to install, drop-in fitment with the factory style connector – no plug conversion required! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055717505,"sku":"IS304-1650H","price":1623.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-14-14x8_GMDATA_a87fc2b6-a524-40e2-9c26-c107f71b4e12.jpg?v=1779508287"},{"product_id":"is304-1440h","title":"1440cc (160 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x1440cc\/min (140lbs\/hr) at 3 bar (43.5psi) fuel pressure and 160lbs\/hr (1700cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055750273,"sku":"IS304-1440H","price":1470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-14-14x8_GMDATA_2b993ebc-20bf-447d-9e14-efd905ada90f.jpg?v=1779508288"},{"product_id":"is304-1200h","title":"1200cc (130 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x1200cc\/min (110lbs\/hr) at 3 bar (43.5psi) fuel pressure and 130lbs\/hr (1350cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTJETR8 or add PADPJtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. PREVIOUSLY IS304-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757055783041,"sku":"IS304-1200H","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-14-14x8_GMDATA_7f265722-a762-4e87-a916-a89f589bba3d.jpg?v=1779508289"},{"product_id":"is304-1000h","title":"1000cc (100 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x1000cc\/min (85lbs\/hr) at 3 bar (43.5psi) fuel pressure and 100lbs\/hr (1040cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8.These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056209025,"sku":"IS304-1000H","price":762.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_f5d2cdd7-d3b4-4520-ab7d-d9d287e4ddc2.jpg?v=1779508290"},{"product_id":"is304-0775h","title":"775cc (85 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x775cc\/min (74lbs\/hr) at 3 bar (43.5psi) fuel pressure and 85lbs\/hr (900cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056274561,"sku":"IS304-0775H","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_0304863f-4feb-4d48-8dea-04ff8ca47d95.jpg?v=1779508291"},{"product_id":"is304-0650h","title":"650cc (72 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x650cc\/min (62lbs\/hr) at 3 bar (43.5psi) fuel pressure and 72lbs\/hr (750cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056405633,"sku":"IS304-0650H","price":683.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_42a027bc-b1e7-4d66-810b-b504753ea521.jpg?v=1779508292"},{"product_id":"is304-0525h","title":"525cc (58 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x525cc\/min (50lbs\/hr) at 3 bar (43.5psi) fuel pressure and 58lbs\/hr (600cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8.These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056503937,"sku":"IS304-0525H","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_55e0f086-83db-46ba-95de-e231f18b76ab.jpg?v=1779508293"},{"product_id":"is304-0445h","title":"445cc (50 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x445cc\/min (42lbs\/hr) at 3 bar (43.5psi) fuel pressure and 50lbs\/hr (520cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056635009,"sku":"IS304-0445H","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_335a7f46-cd3b-444c-9fd1-ac9132007954.jpg?v=1779508293"},{"product_id":"is304-0365h","title":"365cc (40 lbs\/hr at OE 58 PSI fuel pressure) FIC Fuel  Injector Clinic Injector Set for 4.8\/5.3\/6.0 Truck Motors ('99-'06) (High-Z)","description":"4.8\/5.3\/6.0 ('99-'06) Truck Motors Fuel Injector Clinic Injector Set: 8x365cc\/min (35lbs\/hr) at 3 bar (43.5psi) fuel pressure and 40lbs\/hr (420cc\/min) at OE 58psi (4 bar) fuel pressure. Saturated \/ High Impedance Injectors. Includes Pigtails PGTUSC8 or add PADPUtoGM8. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play GM ECU Data available on our website. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757056766081,"sku":"IS304-0365H","price":609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-14-14x8_GMDATA_90d6ab09-576b-4d2e-8af2-7e531359f56f.jpg?v=1779508295"}],"url":"https:\/\/baeracingperformance.com\/collections\/gm-chevrolet-fuel-injectors.oembed?page=2","provider":"Bae Racing Performance","version":"1.0","type":"link"}