{"title":"Subaru Fuel Injectors","description":"\u003cp\u003eFuel Injector Clinic injector sets for Subaru applications, including WRX, STI, BRZ, and other Subaru performance platforms.\u003c\/p\u003e","products":[{"product_id":"is177-2150h","title":"2150cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Drop-in plug fit! DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757029666945,"sku":"IS177-2150H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-38-11-16x4_SUBARUDATA_1cffdafa-5ad9-4904-9a99-bd7a3b260d64.jpg?v=1779498317"},{"product_id":"is177-1550h","title":"1650cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757029699713,"sku":"IS177-1650H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-38-11-16x4_SUBARUDATA_4bac4b00-0595-476e-9406-67313aac5c29.jpg?v=1779498318"},{"product_id":"is177-1440h","title":"1440cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757029732481,"sku":"IS177-1440H","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-38-11-16x4_SUBARUDATA_2c6d7b82-1dbe-47a6-80ff-feef0ce707f2.jpg?v=1779498319"},{"product_id":"is177-1200h","title":"1200cc (Previously 1100cc) FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x1200 cc High Impedance \/ Saturated Injectors. Great for E85 applications! Includes pigtails PGT JETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. PREVIOUSLY IS 177-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757029798017,"sku":"IS177-1200H","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-38-11-16x4_SUBARUDATA_f6f19ad9-1204-457e-b84e-99ac071e0eef.jpg?v=1779498321"},{"product_id":"is177-1000h","title":"1000cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757029896321,"sku":"IS177-1000H","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-11-16x4_SUBARUDATA_90e73e96-1b90-48e9-9db0-935902eb7bf9.jpg?v=1779498323"},{"product_id":"is177-0850h","title":"850cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z) Previously 770cc","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x850 cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030060161,"sku":"IS177-0850H","price":415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-11-16x4_SUBARUDATA_91604a76-e74d-4bd6-ae46-b1a8094a684e.jpg?v=1779498325"},{"product_id":"is177-0660h-sp","title":"0660cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x0660cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030191233,"sku":"IS177-0660H-SP","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-11-16x4_SUBARUDATA_87fc695d-721f-4522-a2cf-fd0f5324ed0f.jpg?v=1779498326"},{"product_id":"is177-0540h","title":"540cc FIC Fuel Injector Clinic Injector Set for Subaru BRZ (High-Z)","description":"Subaru BRZ Fuel Injector Clinic Injector Set: 4x540 cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030322305,"sku":"IS177-0540H","price":368.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-38-11-16x4_SUBARUDATA_d0203124-d1e0-4019-bc3b-47c19494fb58.jpg?v=1779498329"},{"product_id":"is176-2150h","title":"2150cc FIC Top-Feed Converted Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Featuring state of the art matching with Data Match Technology. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030453377,"sku":"IS176-2150H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-11-11x4_SUBARUDATA_16f294b6-a6b5-4f09-932c-9a324bf27844.jpg?v=1779498332"},{"product_id":"is176-1650h","title":"1650cc FIC Top-Feed Converted Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030617217,"sku":"IS176-1650H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-11-11x4_SUBARUDATA_a955dc6c-571d-419e-abac-d59d2dc3efda.jpg?v=1779498334"},{"product_id":"is176-1440h","title":"1440cc FIC Top-Feed Converted Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030649985,"sku":"IS176-1440H","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-11-11x4_SUBARUDATA_ae3f4206-7090-409f-968d-71610c204176.jpg?v=1779498336"},{"product_id":"is176-1200h","title":"1200cc (Previously 1100cc) FIC Top-Feed Converted Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Featuring state of the art matching with Data Match Technology. Includes pigtails PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. PREVIOUSLY IS176-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030682753,"sku":"IS176-1200H","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-11-11x4_SUBARUDATA_6448125b-b3ce-4f8d-8dcb-14d55e71e6af.jpg?v=1779498337"},{"product_id":"is176-1000h","title":"1000cc FIC Top-Feed Converted Subaru Sti ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030715521,"sku":"IS176-1000H","price":457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-11x4_SUBARUDATA_3e360f54-1f8e-48df-a68f-0fb25126e25e.jpg?v=1779498338"},{"product_id":"is176-0775h","title":"775cc FIC Top-Feed Converted Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL Sti): 4x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030813825,"sku":"IS176-0775H","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-11x4_SUBARUDATA_bd74cc01-64f5-49db-9ea1-a2586d561cd9.jpg?v=1779498340"},{"product_id":"is176-0650h","title":"650cc FIC Top-Feed Converted Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru STi ('04-'06) Legacy GT ('05-'06) Fuel Injector Clinic Injector Set (ONLY fits original tumblers with FIC top feed fuel rail conversion RL STi): 4x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757030944897,"sku":"IS176-0650H","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-11x4_SUBARUDATA_edb24ff5-105f-4a07-884d-f6e3df52f3da.jpg?v=1779498341"},{"product_id":"is175-2150h","title":"2150cc Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+)Fuel Injector Clinic Injector Set (and fits '04-'06 STi with WRX tumbler conversion): 4x2150cc Saturated \/ High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. \u003cp\u003eThis massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.\u003cbr\u003eEach injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eCAUTION! The internal construction of this 2150cc\/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031043201,"sku":"IS175-2150H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/2150-53-11-16x4_SUBARUDATA_c9225d37-bb4c-43d0-a522-11d645f6580c.jpg?v=1779498342"},{"product_id":"is175-1650h","title":"1650cc FIC Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+) Fuel Injector Clinic Injector Set (and fits '04-'06 Sti with WRX tumbler conversion): 4x1650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. \u003cp\u003eFuel Injector Clinic’s 1650cc\/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline. \u003cbr\u003e\u003cbr\u003eThe 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!\u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031174273,"sku":"IS175-1650H","price":914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1650-53-11-16x4_SUBARUDATA_6032b823-46b0-426c-8ea0-7dd1c4d87c09.jpg?v=1779498343"},{"product_id":"is175-1440h","title":"1440cc FIC Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+) Fuel Injector Clinic Injector Set (and fits '04-'06 Sti with WRX tumbler conversion): 4x1440cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTUSC8 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eFuel Injector Clinic’s 1440cc\/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.\u003c\/p\u003e\u003cp\u003eThe 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels! \u003c\/p\u003e \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031207041,"sku":"IS175-1440H","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1440-53-11-16x4_SUBARUDATA_90ae133d-11bf-408e-aa77-5fda73bf8b95.jpg?v=1779498345"},{"product_id":"is175-1200h","title":"1200cc (Previously 1100cc) Subaru WRX('02-'14)\/Sti ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+)Fuel Injector Clinic Injector Set (and fits '04-'06 STi with WRX tumbler conversion): 4x1200cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGTJETR4Q or add Plug \u0026amp; Play adaptors PADPJtoD4. PREVIOUSLY IS175-1100H. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031239809,"sku":"IS175-1200H","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1200-53-11-16x4_SUBARUDATA_47345617-9d34-476a-b499-ba4d78393e83.jpg?v=1779498346"},{"product_id":"is175-1000h","title":"1000cc Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+)Fuel Injector Clinic Injector Set (and fits '04-'06 STi with WRX tumbler conversion): 4x1000cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031272577,"sku":"IS175-1000H","price":457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-16x4_SUBARUDATA_21e6ddd7-4d55-427d-8c2f-667556466af8.jpg?v=1779498348"},{"product_id":"is175-0775h","title":"775cc Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z)","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+)Fuel Injector Clinic Injector Set (and fits '04-'06 STi with WRX tumbler conversion): 4x775cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031305345,"sku":"IS175-0775H","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-16x4_SUBARUDATA_29d3e86f-c3d9-4cfb-96b6-817410c76e32.jpg?v=1779498349"},{"product_id":"is175-0650h","title":"650cc Subaru WRX('02-'14)\/STi ('07+) Fuel Injector Clinic Injector Set (High-Z).","description":"Subaru WRX ('02-'14) \u0026amp; STi ('07+)Fuel Injector Clinic Injector Set (and fits '04-'06 STi with WRX tumbler conversion): 4x650cc Saturated \/ High Impedance Ball \u0026amp; Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug \u0026amp; Play adaptors PADPUtoD4. \u003cp\u003eThis injector set is precisely matched using Fuel Injector Clinic's proprietary \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/data-match-technology\"\u003eData Match Technology\u003c\/a\u003e\u003c\/strong\u003e. Each injector is individually serial numbered and the results are provided on the \u003cstrong\u003e\u003ca href=\"https:\/\/fuelinjectorclinic.com\/image\/data\/data.sheet.template.SAMPLE.jpg\"\u003eData Match Sheet\u003c\/a\u003e\u003c\/strong\u003e providing the most complete flow matching and latency value information available in the industry today. \u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.\u003cbr\u003e\u003cbr\u003eSuperior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.\u003cbr\u003e\u003cbr\u003eFuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.\u003cbr\u003e\u003cbr\u003eEvery injector is covered against failure caused by defects in original manufacture by our lifetime warranty.\u003c\/p\u003e \u003cp\u003eThis set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.\u003cbr\u003e\u003cbr\u003eThis plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.\u003c\/p\u003e","brand":"Fuel Injector Clinic","offers":[{"title":"Default Title","offer_id":40757031370881,"sku":"IS175-0650H","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/1264\/0897\/files\/1000-53-11-16x4_SUBARUDATA_04047cf8-a294-4014-99e3-785506885b89.jpg?v=1779498350"}],"url":"https:\/\/baeracingperformance.com\/collections\/subaru-fuel-injectors.oembed","provider":"Bae Racing Performance","version":"1.0","type":"link"}